snacking and all production lines to suit you, whatever your working method.

Cleaning your samosa folding machine is often a daunting task, but it is not a science! Just a little precaution is all you need to ensure safe long-term use of your machine. It will also give you a better quality product!

Let's get down to business, there is not much to explain about cleaning a samosa folding machine, it is quite simple. We promised you quick cleaning and simple maintenance, it is done! Here are the few steps you have to do after each use:

First important and reassuring point (for you!), no matter which machine you have chosen, its small size makes it easily transportable for cleaning.

3 areas of the machine need to be cleaned:

#1 The circuit sticks

We are talking about the pump and the solenoid valve here.

• Empty the glue tank and clean it thoroughly
• Fill the tank with clean water
• Cleaning the glue circuit can be done using button 8 on the machine and 2 liters of clear water.
• Repeat the operation a second time to ensure that the circuit is properly cleaned.
• Leave clean water in the circuit so that the system is always wet

We recommend that you provide a container to collect the cleaning water.

 #2 The Prank Circuit (Robot B & C) 

• Remove all knurled nuts from removable parts, place them in a washing container so as not to lose them
• Disassemble the bowl with the auger support and collect the remaining stuffing

#3 Folding table and machine chest

Use water with a bactericidal product, rinse well with clean water.

1. ATTENTION, you must first cut off the power supply to the machine (CONTACT + 110/220V SOCKET)
2. Turn off the compressed air supply
3. You can now wash the machine with bactericidal products before reassembling all the parts.

Connect a gun to the compressed air hose and blow the water out of the machine.

And there you have it! You're done, and it took you about 20 minutes maximum! This step should be done after each use to keep your machine in good condition.

As for the installation of your robot, it can be done by your own technicians. However, it is preferable to plan for assistance from SPECIALDIMENSION technicians in order to properly train your team in the use and adjustment of the machine.